Blank forming of ceramic water cup (9 steps)
The process of the ceramic water cup is as follows: mold cleaning → mold closing → rubbing mud strips → blank printing → mold opening → blank trimming → bonding → stamping (lettering) → drying
1. Mold cleaning: clean the working surface of the model to prevent impurities from entering the green body.
2. Mold closing: combine the block models together. In the process of printing blanks, according to needs, some molds are closed first, some are printed while closing, and some molds are separated and then closed after printing blanks, and so on.
3. Kneading mud strips: Pat the trained mud into mud cakes or knead into mud strips of appropriate thickness.
4. Printing blank: Put the mud cake or mud strip into the model, and beat it into a blank with a certain thickness by hand.
5. Mold opening: When the green body hardens to a certain extent, open the model.
6. Blank trimming: smooth the mud pattern or unevenness on the surface of the blank, and turn the round tool.
7. Bonding: Bonding accessories such as ears and legs to the green body.
8. Stamping (lettering): stamp the author’s seal on the bottom of the body or other parts, or the author’s lettering, signature, etc.
9. Drying: Put the completed billet in a place with temperature for drying.
Post time: Jan-10-2023